CPO 315 HFA CNC

Own this machine for as low as
$840/month
through Scotchman Credit Corp.

Description
Std. Features
Capacities/Specs
Options
Video

The CPO 315 HFA-CNC saw is fully programmable so every cut length is fast and accurate. It uses a 30" linear actuator, driven by a servo motor. With its 12-1/2" blade, it allows you to cut up to 3-1/2" diameter tube or pipe and up to 1-3/4" solid material, while maintaining a length tolerance of +or- .006" per index and has a squareness tolerance of +or- .002" per diameter inch.

The CPO 315 HFA-CNC's standard features include a large 10" touch screen control, an unlimited length setting with a 30" single length shuttle and a variable speed control. The setup to change to a different part length takes only a few seconds, plus the first part cut is always accurate. This saw has the ability to program a set length with a specific number of pieces or enter up to four separate lengths and amounts to be cut in sequence. This American-made machine is available in 230 or 460 volt configurations and is backed by Scotchman Industries' Best-in-the-Business, 2-year warranty.

Fully Automatic Cylce

Touch Screen Controls

5 HP Variable RPM Speed Control (Ferrous Model)

Interlocking Safety Hood

Clamping both Sides of Blade--Highest Quality, Burr-free Cuts

Blade Guides for Accurate Tolerances (Ferrous Model)

Mist Coolant

Adjustable Stroke Control on the Saw Head

Adjustable Down Feed Control on the Saw Head for Feed Rate

Fast Length Setup

No Wrenches required to Set Length

Adjustable Indexing Feed Speeds

Program up to Four Separate Cut Lengths in each Job

100 Program Job Storage

30" Shuttle Length

Unlimited Shuttles

Piece Counter

One Saw Blade

One Gallon Concentrated Coolant (Ferrous Model)

One Gallon Coolant (Non-ferrous Model)

Warranty: Two Years on Parts

Made in the USA

Cutting Speeds Based on Mild Steel	CPO 315 HFA CNC CPO 315 HFA CNC NF	Variable Speed 11 to 177 rpm 3,000
Cutting Capacities based on Mild Steel	Round Tube Square Tube Round Solid Square Solid	Up to 3-1/2" ( ≤ 89 mm) Up to 3-1/8" x 3-1/8" ( ≤ 79 mm) Up to 1-3/4" ( ≤ 44.5 mm) Up to 1-1/2" x 1-1/2" ( ≤ 37 x 37 mm)
Length Tolerance	+ or - 0.006" per index
Squareness Tolerance	+ or - 0.002" per diameter inch
Motor HP	5 hp
Power Supply	208/230/460 3 Ph (must specify voltage)
Air Pressure	90 lbs. minimum
Maximum Saw Blade Diameter	12-1/2" (315 mm)
Arbor Bore Size	40 mm
Pin Spacing	4 / 12 / 64
Dimensions	L- 72" x W-44" x H-64"
Shipping Weight	1,770 lbs (802 kg)