SUP-600 AngleMaster

Share Print

This SUP-600 NF Upcut cold saw has been coupled with AngleMaster technology and is now a true production saw.  It is programmable and will feed material, cut multiple angles at different part lengths and more with a push of a button.

This Upcut Circular Cold Saw is disigned specifically for cutting non-ferrous material and features a 24" (600mm), 132 tooth carbide blade which is capable of producing round cuts up to 9" in diameter and rectangular cuts up to 15" x 6", the SUP-600 NF offers an increased cutting capacity not found in traditional pivot down saws.  Coupling this saw with our new AngleMaster measuring system, creates a semi-automatic programmable saw system that automatically rotates to any cut angle, pushes the material into the saw and automatically rotates to the next desired angle.  (It gives you a completely finished part.)  Plus, you can store cut lists in its 21" touch screen control.  A MUST SEE for the aluminum extusion market.

Standard features include an adjustable feed rate, mitering capability with fixed stops at 22.5 degrees, 45 degrees, 90 degrees, -45 degrees and -22.5 degrees, two horizontal and two vertical pneaumatic clamps to secure material being cut and a 4-1/2" port for chip collection plus a drawer under the bottom of the saw.  The SUP-600 NF is available in 230 volt and 460 volt configurations and is backed by Scotchman's superior warranty.

The AngleMaster System Push Feeds your Stock to the Miter Saw which is Automatically Rotated to the Angle Designated for your Part.
Right to Left Feed Only!
Feed Available - 10' to 30'
Touch Screen Controls
Software (Includes Profile Screen)
Job Storage
Precision Miter Upcut non-ferrous Saw
Powered Safety Hood with Safety Switch that will not allow Saw to run with Hood Open
Blade Door with Safety Interlock Switch
Dual Palm Buttons
Adjustable Feed Rate on Saw Head
Two Horizontal Pneumatic Clamps
Two Vertical Pneumatic Clamps
Miter Capability
Capable of Slotting
One Gallon Coolant
Coolant Tank with Mist Lubrication
One 24" (600 mm) diameter, 132-tooth Carbide Blade (SUP-600 NF)
One Blade Wrench
Air Hose
Chip Collection Drawer in Base and a 4-3/4" Chip Collection Port
Adjustable Leveling Pads
230 or 460 volt/3-ph electircs, (must specifiy voltage)
Two-year Warranty on Parts (SUP Saw)
One-year Warranty on Parts (AngleMaster)
Saw made in Spain/AngleMaster made in Ames, IA
SUP 600 NF
90 Degree
8" (203 mm)
7" (178 mm)
9 x 5" (228 x 127 mm)
45 Degree
7" (177 mm)
6" (152 mm)
7" x 4-3/4" (178 x 120 mm)
Non-Ferrous Upcut Saw designed for Aluminum, PVC, Copper, etc.
Cutting Speed 3,000 RPM
Motor Rate 5.5 HP
Factory Wired Specify for both:
230 3-ph
460 3-ph
Maximum Diameter Blade 24" (600 mm) (SUP 600)
Arbor Bore 1.97" (50 mm)
Width: 51-1/4" (SUP-600)
Depth: 48" (SUP-600)
Height: (Top of Hood) 64-3/8" (SUP 600)
(From Floor to Vise) 38-5/8" (970 mm)
Shipping Weight: 1,102 lbs. (500 kg) [SUP 600]
Chip Vac - V-460
Chip Vacuum - V-460

Ideal for collecting steel, dust, aluminum and plastic shavings.

Standard features include:
27 gallon storage with quick release handle
Air filter shaker turbine
2hp motor
706 cfm air flow through a 4" inlet

Carbide Blade_538.jpg
Carbide Blade

Carbide-Tipped Blades
Scotchman offers carbide-tipped saw blades in stock for immediate delivery.

Carbide-Tipped Blade Sharpening
Scotchman offers a fast, high quality blade sharpening service.

usa iconProud American Manufacturer
Est. 1967



3 Year WarrantyAll of our products are designed to increase production, accuracy, and efficiency for our customers. We offer in-house financing and a best-in-the-business warranty on Ironworkers, Cold Saws, Band Saws and Tube & Pipe Notchers.

Have Questions?

Contact Us

Grey GlobeOur knowledgeable, friendly staff is available to answer any questions or help you find the right product for your needs. Contact Scotchman today

Check Out Our Great

Leasing Rates

SCC logoScotchman has leasing plans to fit your needs. Plans ranging from 1 year to 5 years are available. Scotchman's leasing programs