Over the years, Scotchman Industries has designed and manufactured thousands of special sizes and shapes of punches and dies. Shown below are a few samples we’ve made. In addition to punches & dies, Scotchman can design and manufacture custom tools including: brakes, shears and V- notchers for your special application.

If you have an application that requires punching, forming, notching, or bending of a special part, give us a call at 1-800-843-8844 or click on the "Request Custom Tooling Here" image below.

Punches
Channel Iron Die Holders Custom made dies and die holder to allow channel iron to be punched legs down.
Offset Die Holder with Stripper Custom made offset dies to punch large oval slots close to the leg of angle iron.
Punching Holes in forged wrenches box-end Custom made punches to punch holes in the box end of a forged wrench.
Custom made large diameter round punches and dies up to 4"
Bolt Broaching Tool Broaching tool, Making hex head bolts, custom
Tube Punches
1" x 2" Rectangle Tube Punch
Mandrel Punch Custom made mandrel punch-- to punch an oval hole in rectangle tubing.
Set of Tube Punches Two different sized mandrel tube punches to be mounted on the machine at the same time ~ one is mounted in the punch station, the other is mounted on the tool table.
Mandrel Punch Custom built mandrel punch to punch 1-1/4" square tube with 6 fixed stops.
Mandrel Punch Custom built mandrel punch to punch 4" OD pipe with 5 fixed stops.
Custom built mandrel punch to punch 2" square tubing with 13 fixed stops.
Custom made mandrel punch to punch a square hole in rectangle tubing.
Custom built six-hole punch and die (2 views).
Mandrel Tube Punch
Round Tube Punch allows you to punch hole through tube
Square Tube Punch Punches multable holes in square tubing. spaced how ever you want them.
Multiple Punch Tooling
Two-in-One Punch Custom built punch and die to punch two oval holes at the same time.
Custom built punch and die to punch three holes at the same time.
Custom built two hole punch and die with replaceable punch diameters.
Custom built three-hole punch and die (3 views).