$249/month through Scotchman Credit Corp. |
AL1-2U |
Share ![]() |
Print ![]() |
The AL1-2U is equipped to notch 3/4", 1", 1-1/4", 1-1/2" and 2" up to schedule 40 wall thickness. This model is also equipped with a vent notching die to quickly create a uniform vent-notch in round or square workpieces for galvanizing outflow.
Powered Combination of AL1, AL 2 and ALU |
Motor: 3-1/2hp (230V/460V, 3ph) |
Motor Driven-Notches 3/4", 1", 1-1/4", 1-1/2" and 2" up to schedule 40 wall thickness |
Includes Vent Notch to Quickly Create a Uniform Vent-notch in Round or Square Sections for Galvanizing Outflow from 1.0630" to 2.40158" Outside Diameter |
Motor Forms One Unit with Special Eccentric Shaft that Drives the Notching Tool |
Motor Equipped with On/Off Switch with a Zero Voltage Protection and Guard |
Equipped with Safety Guard to Surround and Protect Notching Dies |
Warranty: Three Years on Parts |
Manufactured in the Netherlands |
Notches | 3/4", 1", 1-1/4", 1-1/2" and 2" up to schedule 40 wall thickness | |
Motor | 3-1/2 hp 3ph
230v |
2.2 kW |
Dimensions | 30" x 13-1/2" x 11-1/2" | 762 mm x 343 mm x 292 mm |
Vent Notch Maximum Wall Thickness | .197" | |
Shipping Weight | 200 lbs | 90 Kgk |
Proud American Manufacturer
Est. 1967